Parallelled Telephone Features
By connecting
telephones in parallel, you can increase the number of telephones connected to the PBX without
adding additional extension cards. (® 1.11.9 Parallelled Telephone)
Parallel Mode
An SLT can be connected to an APT or DPT that is connected to a Super Hybrid port of the PBX. The SLT
shares the same extension number with the APT or DPT.
EXtra Device Port (XDP) Mode
An SLT can be connected to a DPT that is connected to a Super Hybrid port of the PBX. Unlike parallel
mode, XDP mode allows each telephone to act as an independent extension with its own extension
number.
Digital XDP
A DPT can be connected to another DPT that is connected to a DPT port or a Super Hybrid port of the
PBX. Similar to XDP mode, each DPT acts as an independent extension with its own extension number.
Portable Station (PS) Features
PSs (e.g., KX-TCA255, KX-TD7690) can be connected to this PBX. It is possible to use the PBX features using
the PS like a PT. A PS can also be used in parallel with a wired telephone (Wireless XDP Parallel Mode). In
this case, the wired telephone is the main telephone and the PS is the sub telephone. (® 1.25 Portable Station
(PS) Features)
Hospitality Features
This PBX has several features that support its use in a hotel-type environment. Extensions corresponding to
guest rooms can be "checked in" or "checked out" by a designated hotel operator, who can also check or set
wake-up calls, and print out records of guest charges. (® 1.27.1 Hospitality Features—SUMMARY)
Built-in Simplified Voice Message (SVM) Features
By just installing an optional voice message card in the PBX, simple answering machine services can be
provided. (® 1.17.8 Built-in Simplified Voice Message (SVM))
6 Feature Guide
Introduction
To Next Page
Loading...
