Panasonic KX-TDA50 - Page 232

2.8 [2] System
232 PC Programming Manual
Value Range
0 (continuous)–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.4.9 DND (Do Not Disturb)
Tone Length—Reorder Tone for PT Handset
Specifies the length of time that a reorder tone is heard when using a PT handset. The PT will return
to idle status when this timer expires.
Default
10 s
Value Range
1–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.1.5 Automatic Extension Release
Tone Length—Reorder Tone for PT Hands-free
Specifies the length of time that a reorder tone is heard from the built-in speaker of a PT in hands-
free mode. The PT will return to idle status when this timer expires. This setting is applied to PSs as
well as PTs.
Default
3 s
Value Range
1–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters