Panasonic KX-TDE100 - Incoming Call Queue Monitor

Feature Guide References
1.2.2.7 Log-in/Log-out
Incoming Call Queue Monitor
Specifies
the
feature number, available only for extensions assigned as a supervisor, used to monitor the status
of an incoming call distribution group with the extension display.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
5.13 [3-5-1] Incoming Call Distribution Group—Group Settings—Miscellaneous—
Supervisor Extension
Number
Feature Guide References
1.2.2.8 Supervisory Feature
Hot Line (Pickup Dial) Program Set / Cancel
Specifies the feature number used to set/cancel the Hot Line feature, or programme the number to be
automatically dialled.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
4.5 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone— Dial—Hot Line (Pickup Dial) Start
Feature Guide References
1.6.1.7 Hot Line
Absent Message Set / Cancel
Specifies the feature number used to set or cancel the display of an Absent Message.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
514 PC Programming Manual
4.9 [2-6-1] Numbering Plan—Main