2.6.6 Utility—Message File Transfer PC to PBX
Transfers Outgoing
Message (OGM) files from the PC to the selected MSG/ESVM card/block mounted on an
OPB/IPCMPR/IPCEMPR card.
This option is only available at Installer level.
Note
• When transferring to or from an MSG/ESVM card mounted on an OPB card, the OPB card must be
set to OUS status.
• When transferring
to or from the built-in ESVM block on the IPCMPR/IPCEMPR card, the ESVM block
must be set to OUS status.
Files are stored on the MSG/ESVM card/block in the location specified by the file’s header information.
Uploaded files are automatically renamed as necessary. If this location already contains an OGM, it will be
overwritten by the newly uploaded message.
To transfer OGMs to an MSG/ESVM card/block
1. From the Utility menu, select Message File Transfer PC to PBX.
2. Select the target MSG/ESVM card/block, or "ALL", from the drop-down list, and click OK.
The Open dialogue box will be displayed.
3. Select the message files to upload.
It is possible to select multiple files.
4. Click OK.
The files will be uploaded. Files that do not contain message data will be ignored.
When complete, the display will return to the main screen.
PC Programming Manual 75
2.6.6 Utility—Message File Transfer PC to PBX
To Next Page
Loading...
