3.10 Connection of 2.4 GHz Portable Stations
Installation Manual 209
3.10.8 Wall Mounting
Mounting the KX-TDA0151/KX-TDA0152
1. Place the reference for wall mounting (KX-TDA0151/KX-TDA0152) on the wall to mark the 2 screw
positions.
2. Install the 2 screws and washers (included) into the wall.
Notes
• Make sure that the screw heads are at the same distance from the wall.
• Install the screws perpendicular to the wall.
3. Insert the upper and lower tabs of the wall mounting plate into the designated openings in the base unit.
4. Slide the wall mounting plate in the direction of the arrow until it clicks.
5. Hook the CS on the screw heads.
KX-TDA0151/KX-TDA0152
KX-TDA0151/KX-TDA0152
KX-TDA0151/KX-TDA0152
Tabs
To Next Page
Loading...
