Panasonic KX-TDE100 - DIL (Direct in Line)

Feature Manual References
3.1.14 CLI (Calling Line Identification) Distribution
9.1.10 INCOMING CALL FEATURES
17.1.3 Tenant Service
17.1.5 Time Service
21.1 Capacity of System Resources
4.1.7 DIL (Direct In Line)
Description
Directs
an incoming
public CO line call to a preprogrammed destination based on the CO line carrying the call.
Each CO line has a destination for each time mode.
[Method Flowchart]
A CO line call is received.
Yes
Yes
No
Does the call have
Caller ID information and is CLI
distribution enabled for the CO line in
the current time mode?
No
Has the caller
been stored in the System Speed
Dialing Table and has a CLI destination
been assigned?
The call is routed to the
DIL destination.
The call is routed to its
CLI destination.
The call is routed to an
operator (Intercept
Routing—No Destination).
Yes
Is a DIL destination assigned
for the current time mode?
No
72 Feature Manual Document Version 2009-12
4.1.7 DIL (Direct In Line)