Maintenance Console Location
4.12 [2-7-1] Class of Service—COS Settings
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Main— COS
6.10 [4-2-1] Portable Station—Extension Settings—Main— COS
Feature Guide References
2.2.1 Class of Service (COS)
Group Forward Set
Enables setting call forwarding for calls to an incoming call distribution group.
Value Range
Disable: An extension cannot set call forwarding for any group.
Enable-All: An extension can set call forwarding for all groups.
Enable-Group
: An extension can only set call forwarding for the group to which the extension belongs.
Maintenance Console Location
4.12 [2-7-1] Class of Service—COS Settings
Programming Manual References
5.14 [3-5-1] Incoming Call Distribution Group—Group Settings—Member List
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
COS
6.10 [4-2-1] Portable Station—Extension Settings—Main— COS
Feature Guide References
1.3.1.2 Call Forwarding (FWD)
Programming Mode Level
Specifies the level of authorisation for performing PT programming.
Value Range
Disable: A PT user cannot perform any programming.
PROG Only: A PT user can perform only personal programming.
PROG and PROG **/*#: A PT user can perform both personal and system programming.
Maintenance Console Location
4.12 [2-7-1] Class of Service—COS Settings
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Main— COS
514 PC Programming Manual
4.12 [2-7-1] Class of Service—COS Settings
To Next Page
Loading...
