2.3 Inserting the SD Memory Card to the IPCMPR Card
12 Getting Started for Virtual IP Cards
2.3 Inserting the SD Memory Card to the IPCMPR
Card
The SD Memory Card contains software for all the processes of the PBX and all the customer data. The SD
Memory Card must be inserted before startup.
CAUTION
Do not remove the SD Memory Card while power is supplied to the PBX. Doing so may cause the PBX
to fail to start when you try to restart the system.
2.4 Installing the Power Supply Unit
Slot Position
Install the power supply unit (PSU) into the PSU slot.
IPCMPR Card
Example: KX-TDE200
SD
CARD
SD
CARD
SD
CARD
KX-TDE100 KX-TDE200
PSU Slot
Free Slots
IPCMPR Card
PSU Slot
Free Slots
IPCMPR Card
Null Slot