Panasonic KX-TDE100 - Call Distribution Port Group

1.2 Receiving Group Features
Feature Guide 71
1.2.3 Call Distribution Port Group
Description
When using the Virtual 16-Channel VoIP Gateway Card (V-IPGW16) to receive calls, it is possible to set
which virtual port receives each call depending on the telephone number of the called party.
By assigning each port to a Call Distribution Port Group (CDPG), it is possible to select which group receives
each call. CDPG settings cover all V-IPGW cards in the PBX, which allows for ports on different cards to be
assigned to the same CDPG. In other words, two 8-port cards can be used as one 16-port card.
Programming Example:
To enable this feature, it is necessary to programme the following 2 tables through system programming:
• CDPG Table
- in order to assign ports to Call Distribution Port Groups.
• Hunt Pattern Table
- in order to programme a priority list of CDPG destinations for each leading number.
[Programming Example of the CDPG Table]
[Programming Example of the Hunt Pattern Table]
V-IPGW Card Number Port Number
Call Distribution Port Group
*1
11 CDPG 1
12 CDPG 2
1: :
18 CDPG 2
21 CDPG 1
2: :
28 CDPG 3
*1
:
→ 2.7.7 [1-1] Slot—Virtual IP Gateway Port—Call Distribution Port Group
No. Leading
Number
*1
Call Distribution Port
Group (1st)
*2
Call Distribution Port
Group (2nd)
*2
... Call Distribution Port
Group (16th)
*2
1 10 CDPG 1 CDPG 4 ... -
220 CDPG 1 CDPG 2 ... CDPG 3
:: : : ... :
32 300 CDPG 8 CDPG 11 ... -
*1
:
→ 2.7.13 [1-1] Slot—Virtual IP Gateway Shelf Property—Hunt Pattern—Hunt Pattern 1–16—Leading
Number
*2
:
→ 2.7.13 [1-1] Slot—Virtual IP Gateway Shelf Property—Hunt Pattern—Hunt Pattern 1–16—Call
Distribution Port Group—1st–16th