To Next PageTo Next Page
What to do if IP-PT cannot connect to the PBX on Panasonic IP Phone?
If the IP-PT cannot connect to the PBX on your Panasonic IP Phone, check and correct the IP address, subnet mask address, PBX IP address, or default gateway address. Also, check the Ethernet cable connections. If using a DHCP server, restart it or disable DHCP and re-enter settings as appropriate.
Why do I hear a busy tone when using a SIP Extension on my Panasonic IP Phone?
If you hear a busy tone when making calls using a SIP Extension on your Panasonic IP Phone, change the port status from Out of Service to In Service using the Maintenance Console.
What to do if I cannot register the IP-PT on Panasonic PBX?
If you cannot register the IP-PT on your Panasonic PBX, ensure the necessary network parameters are correctly set. If you are not using a DHCP server, set the IP address, subnet mask address, and enter the PBX IP address. If necessary, also enter the IP address of the default gateway. If you are using a DHCP server, enter the PBX IP address.
Why IP-PT cannot connect to the PBX Panasonic?
If the IP-PT cannot connect to the PBX, check the following on your Panasonic PBX: * Ensure the IP address, subnet mask address, PBX IP address, and default gateway address are entered correctly; verify each parameter. * Check the Ethernet cable connections to ensure they are properly connected. * If using a DHCP server, restart it or disable DHCP and re-enter settings as appropriate.
What to do if I hear a busy tone when making calls using a SIP Extension on Panasonic KX-TDE100 PBX?
If you hear a busy tone when making calls using a SIP Extension on your Panasonic PBX, the port that the SIP Extension is connected to may be Out of Service. Use the Maintenance Console to change the port status from Out of Service to In Service.
Why is nothing audible when using the speakerphone on an APT Panasonic KX-TDE100?
If nothing is audible when using the speakerphone on an APT with your Panasonic PBX, check the HANDSET/ HEADSET selector. If it is set to the "HEADSET" position and you are not using a headset, set it to the "HANDSET" position.
Why is nothing audible when using the speakerphone/monitor mode with a DPT Panasonic KX-TDE100?
If nothing is audible when using the speakerphone/monitor mode with a DPT on your Panasonic PBX, the "HEADSET" mode may be selected by Personal Programming. If you are not using a headset, select the "HANDSET" mode by Personal Programming.
How to fix Panasonic PT when it does not ring?
If your PT does not ring on your Panasonic PBX, check the ringer volume. If the ringer volume is off, turn it on.
What to do during a power failure when extensions connected to certain ports do not operate on Panasonic PBX?
If extensions connected to ports 1 to 4 of MSLC16/CSLC16/ SLC16 and ports 1 to 2 of DHLC8/SLC8/ MCSLC16/MCSLC24 cards do not operate during a power failure on your Panasonic PBX: * If a DPT or APT is connected to the extension port, disconnect the DPT or APT and connect an SLT. * If the dialing mode (tone or pulse) is incorrect, set the Tone/Pulse switch to the other position.
Why can't I make or receive calls on my Panasonic IP Phone?
If you cannot make or receive calls via an IP network on your Panasonic IP Phone, ensure all network devices are switched on and there are no unwanted firewalls. Also, check that an 8-pin twisted pair cable is used, CAT 5 cables are not over 100 m (328 ft), and a straight cable connects to the switching hub. If the issue persists, the IP-EXT/IP-GW/DSP card or IPCMPR card may be malfunctioning, requiring replacement. Finally, check if you have enough activation keys and purchase additional ones if needed.
Details on supporting IP communication with various IP telephones and SIP extensions.
Information on using cellular phones as PBX extensions for making and receiving calls.
General safety guidelines to prevent danger and property damage during product use.
Specific considerations and limitations for users of SIP extensions.
Instructions for collecting and disposing of old equipment and batteries in the EU.
Initial setup and understanding telephone types and feature numbers.
Detailed procedures for initiating various types of calls.
Instructions on how to answer incoming calls and handle call waiting.
Managing calls during an active conversation, including transfer and hold.
Features for managing calls when away, like call forwarding.
Customizing telephone features such as alarms and DND.
Connecting and operating external devices like doorphones and relays.
Utilizing the call log and directories on display telephones.
Specific functions for IP proprietary telephones, including self-labelling.
Manager's capabilities to control and monitor other extensions.
Managing other extensions, including locking, unlocking, and status changes.
Manager's ability to change time-based service modes like Day/Night.
Personalizing telephone features and settings according to user needs.
Detailed configuration of system features and parameters via programming.
Assigning specific functions or numbers to flexible buttons for quick access.
Features available for managers to program call charges and control extensions.
Customizing system-wide settings like date, time, and speed dialling.
Common problems and solutions for telephone and PBX operation.
A table listing feature numbers and their corresponding digits or buttons.
Explanation of various audible tones used by the telephone system for feedback.
General