What to do if Panasonic PBX line is disconnected while talking to an outside party?
If your Panasonic PBX line is disconnected while talking to an outside party, the time limit might have run out. Consult your dealer to extend the time limit, if necessary.
What to do if Panasonic PBX does not operate properly?
If your Panasonic PBX isn't operating correctly: * Press the Reset Button. * Turn the power switch off, then on again. * Turn off the power switch, unplug the PBX, wait 5 minutes, plug it back in, and turn the power switch back on. * If the error no. 41 is displayed in the error log, replace the IPCMEC card.
How to fix IP-PT cannot connect to Panasonic KX-TDE200NZ PBX?
If the IP-PT cannot connect to the Panasonic PBX, consider the following: * Incorrect IP address, subnet mask address, PBX IP address, or default gateway address: Check each parameter and enter the correct value. * Ethernet cable not connected correctly: Check the Ethernet cable connections. * DHCP server is not active: Restart the DHCP server, or disable DHCP and re-enter settings.
How to improve Panasonic PBX display?
To improve the display on your Panasonic PBX, try changing the Display contrast level.
What to do if my Panasonic KX-TDE200NZ phone buttons are not responding?
If your Panasonic PBX telephone does not respond when buttons are pressed, it could be because the telephone is locked. Unlock your telephone. It is also possible that your telephone is connected to an eXtra Device Port, and in this case system programming is required, so consult your dealer.
How to improve the display on my Panasonic KX-TDE200NZ PBX?
To improve the display on your Panasonic PBX, change the Display contrast level.
Why does my Panasonic KX-TDE200NZ PS stay out of service after CS is back in service?
If the PS remains out of service after changing the CS status from Out of Service to In Service on your Panasonic PBX, it may take about 20 seconds for the CS to start up. Wait until the CS starts up completely.
Why did PC and fax communication fail with Panasonic PBX?
If the PC and fax machine communication failed with your Panasonic PBX, an indication tone may have interrupted communication.
Why some features do not work on my Panasonic KX-TDE200NZ?
If some features on your Panasonic PBX system are not working, it could be due to system management restrictions. In this case, consult your manager. Alternatively, the feature numbers might have changed, so confirm the revised number and try again.
How to troubleshoot a Panasonic KX-TDE200NZ PBX telephone that does not work properly?
If your Panasonic PBX telephone isn't working properly, first confirm with your manager that your settings are correct. If the problem persists, you should consult your dealer.
To Next Page
General