Why is the line disconnected while talking to an outside party on Panasonic KX-TDE200NZ?
If the line is disconnected while you are talking to an outside party on your Panasonic PBX, the time limit may have run out. Consult your dealer to extend the time limit, if necessary.
Why can't more than 4 PSs be on a call simultaneously on my Panasonic KX-TDE200NZ PBX?
If you can't have more than 4 PSs on a call simultaneously, even with a high-density CS connected to your Panasonic PBX, ensure that a 4-pair cable is used for the connection.
How to fix KX-HGT100 problems on Panasonic KX-TDE200NZ PBX?
If the KX-HGT100 isn't working correctly or some features are unavailable on your Panasonic PBX, the firmware of the KX-HGT100 and the MPR software file version of the PBX might not be upgraded to their latest versions. Upgrade the firmware of the KX-HGT100 and the MPR software file version of the PBX to their latest versions.
What to do if personal computer and fax machine communication failed on Panasonic KX-TDE200NZ PBX?
If the personal computer and fax machine communication failed on your Panasonic PBX, an indication tone may have interrupted communication.
What to do if Panasonic PBX line is disconnected while talking to an outside party?
If your Panasonic PBX line is disconnected while talking to an outside party, the time limit might have run out. Consult your dealer to extend the time limit, if necessary.
Why did the PC and fax machine communication fail on Panasonic Telephone?
The PC and fax machine communication might have failed because an indication tone may have interrupted communication.
What to do if Panasonic PBX telephone does not respond?
If your Panasonic PBX telephone isn't responding when you press the buttons, it could be because the telephone is locked. Try unlocking your telephone. Another reason might be that your telephone is connected to an eXtra Device Port, which requires system programming. In this case, consult your dealer.
How to fix Panasonic PBX one-touch dialling?
If you cannot make an outside call using the One-touch Dialling button or speed dialling on your Panasonic PBX, it is likely that a line access number was not stored. A line access number is required for outside calls.
How to troubleshoot Panasonic PBX telephone?
If your Panasonic PBX telephone isn't working properly, first confirm with your manager that your settings are correct. If the problem continues, it's best to consult your dealer for further assistance.
Why does my Panasonic KX-TDE200NZ PS stay out of service after CS is back in service?
If the PS remains out of service after changing the CS status from Out of Service to In Service on your Panasonic PBX, it may take about 20 seconds for the CS to start up. Wait until the CS starts up completely.
To Next Page
General