Panasonic KX-TDE600 - 1-1] Slot-Port Property - DID Port-Connection Command

3.48 [1-1] Slot—Port Property - DID Port—
Connection Command
Commands for the DID ports can be programmed.
INS
Puts the port in service.
Value Range
Not applicable.
Maintenance Console Location
3.48 [1-1] Slot—Port Property - DID Port—Connection Command
Programming Manual References
3.47 [1-1] Slot—Port Property - DID Port
Feature Guide References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the purpose of
repair.
Value Range
Not applicable.
Maintenance Console Location
3.48 [1-1] Slot—Port Property - DID Port—Connection Command
Programming Manual References
3.47 [1-1] Slot—Port Property - DID Port
Feature Guide References
None
400 PC Programming Manual
3.48 [1-1] Slot—Port Property - DID Port—Connection Command