Panasonic KX-TDE600 - 1-1] Slot-OPB3 Card Property-Card Command

3.56 [1-1] Slot—OPB3 Card Property—Card
Command
Commands for the service cards installed on the
OPB card can be programmed.
INS
Puts the card in service.
Value Range
Not applicable.
Maintenance Console Location
3.56 [1-1] Slot—OPB3 Card Property—Card Command
Programming Manual References
None
Feature Guide References
None
OUS
Takes the card out of service.
Value Range
Not applicable.
Maintenance Console Location
3.56 [1-1] Slot—OPB3 Card Property—Card Command
Programming Manual References
None
Feature Guide References
None
Pre-INS
Assigns the card type to a certain sub-slot (Pre-installation).
Value Range
MSG4: 4-Channel Message Card
DPH4: 4-Port Doorphone Card
DPH2: 2-Port Doorphone Card
424 PC Programming Manual
3.56 [1-1] Slot—OPB3 Card Property—Card Command