Programming
Number
Programming Group Title Description
[3XX]
TRS/ARS Programming TRS and Automatic Route Selection (ARS)
programming
[4XX]
CO Line Programming CO line and trunk group settings
[5XX]
COS Programming Class of Service parameters
[6XX]
Extension Programming Extension feature settings
[7XX]
Resource/Interface
Programming
PBX interface and external device settings
[8XX]
SMDR & Maintenance
Programming
Station Message Detail Recording (SMDR) and
maintenance feature settings
[9XX]
Card Programming Used to display the cards currently installed in the
PBX, or to delete a card from system programming
before physically removing it.
2.1.2 Slot Number and Port Number
Some programming items require a slot number and port number to be entered, as in the example below.
[410]
DTMF/Pulse
END
SELECT
ENTER
ENTER
Slot No. Port No.
Slot numbers and port numbers are entered as two-digit numbers (e.g., "04" for slot 4).
However, for KX-TDE600, slot numbers are entered as three-digit numbers of the form "XYY":
• X: Shelf number (1–4)
• YY: Slot number (01–11)
PBX Model
Free Slot Number
KX-NCP500 01–05
KX-NCP1000 01–07
KX-TDE100 01–06
KX-TDE200 01–11
KX-TDE600 101–110
201–211
301–311
401–411
16 PT Programming Manual Document Version 2012-10
2.1.2 Slot Number and Port Number
To Next Page
Loading...
