Panasonic KX-TEM824 - PC Programming; Installing and Starting KX-TE Maintenance Console

3.2 PC Programming
Feature Guide 187
3.2 PC Programming
3.2.1 Installing and Starting KX-TE Maintenance Console
To programme and administer the PBX by PC (Personal Computer), you need to install KX-TE Maintenance
Console onto the PC. To install and start KX-TE Maintenance Console when the PC and the PBX are
connected, refer to the Installation Manual ( 3.1.1 Installing KX-TE Maintenance Console on a PC). KX-
TE Maintenance Console starts the programme using the drive where you installed the software
automatically.
System Requirements
Operating System
• Microsoft Windows 98 SE, Windows Me, Windows 2000, or Windows XP
Hardware
• CPU: 133 MHz Intel Pentium or faster
• RAM: At least 64 megabytes (MB) of available RAM (128 MB recommended)
• Hard disk space: At least 100 MB of space for the installation, and approximately 2 MB of additional
space for user files.
®®
®®