Panasonic KX-TEM824 - Programming Procedures; Date & Time [000]; System Speed Dialling Number [001]

3.3 PT Programming
Feature Guide 193
3.3.2 Programming Procedures
Notes
• means default value throughout these programming instructions.
• means to select "All" throughout these programming instructions.
• The following are displayed when you store a number, such as a telephone number, or feature
number:
P: PAUSE; -: CONF; F: FLASH/RECALL; [ ]: INTERCOM
x: PAUSE (substitutes for any number [i.e., wild card])
• To return to the previous programming item, press .
• To correct a wrong entry, press CLEAR and then enter the new input.
• To delete a stored parameter, press CLEAR, enter the new input, and then press STORE.
• Press or to scroll the display.
• Some programmes cannot have a value left empty.
Date & Time [000]
Notes
• The clock starts immediately after the STORE button is pressed.
• The PBX supports years from 2004 to 2099.
Feature & Programming References
1.20.1 Station Message Detail Recording (SMDR)
System Speed Dialling Number [001]
Notes
• An Outside (CO) Line Access number (9/0 [for New Zealand: 1 or 9], 81 through 88) should be
included before the phone number.
0 00
NEXT
year
(00
…
99) (
Jan.
…
Dec. )
SELECT
➞
➞ ➞ ➞
➞ ➞
hour
(1
…
12) (00
…
59) (AM/PM)
day
(1
…
31)
(
Sun
…
Sat )
SELECT
minute
STORE END SELECT
0 0 1
NEXT
speed dialling no. phone no.
STORE END
Max. 32 digits
(0
…
9, , #, P, –, F, [ ])
(00
…
99)
To continue
To continue
SELECT
NEXT PREV
or