Panasonic KX-TEM824 - CO-To-CO Line Call Duration [205]; Dialling Start Time [206]; Hookswitch Flash Timing Range [207]; Inter-Digit Time [208]

3.3 PT Programming
210 Feature Guide
Polarity Reverse Detection [424]
CO-to-CO Line Call Duration [205]
Feature & Programming References
1.10.8 Outside (CO) Line Call Limitation
Dialling Start Time [206]
Note
* The minimum length of time that the PBX waits after seizing an outside (CO) line before dialling that
can be selected depends on your country/area as follows:
For Czech Republic: 0 ms, 250 ms, 500 ms, 750 ms, 1000 ms, 1250 ms, 3500 ms
For Others: 0 ms, 250 ms, 500 ms, 750 ms, 1000 ms, 1250 ms, 1500 ms
Feature & Programming References
1.5.3.3 Outside (CO) Line Access
Hookswitch Flash Timing Range [207]
Feature & Programming References
1.12.1 Call Hold
Inter-digit Time [208]
Feature & Programming References
1.8.1 Toll Restriction (TRS)
No Dial Disconnection [211]
2 0 5
NEXT STORE END
(1
…
32 min)
time
2 0 6
NEXT SELECT STORE END
Refer to the note.*
2 0 7
NEXT SELECT STORE END
(MODE1: 50-180 ms/
MODE2: 80-180 ms/
MODE3: 80-650 ms/
MODE4: 80-1000 ms/
MODE5: 200-1000 ms)
2 0 8
NEXT SELECT STORE END
(5/10/15/20 s)