Panasonic KX-TEM824 - Pulse Speed [402]; Host PBX Access Code [403]; CO Line Group Number [404]

3.3 PT Programming
Feature Guide 219
Pulse Speed [402]
Feature & Programming References
1.5.2.4 Dial Type Selection
Dial Mode [401]
Host PBX Access Code [403]
Note
Insert "," (CONF/MESSAGE button) between each access code using the comma button on the overlay.
For example, to store access codes 81 and 82 on outside (CO) line 1, programme as follows:
403 NEXT 1 81,82 STORE END
Feature & Programming References
1.5.2.7 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
Pause Time [417]
CO Line Group Number [404]
Feature & Programming References
1.5.3.3 Outside (CO) Line Access
4 0 2
NEXT
CO line no. name*
STORE END
(1
…
8/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(Low Speed: 10 pps/
High Speed: 20 pps)
4 0 3
NEXT
CO line no. access code
STORE END
(1
…
8/ )
SELECT
NEXT PREV
or
To continue
To continue
Up to 8 access codes
1 or 2 digits
(0
…
9, , #)
4 0 4
NEXT
CO line no.
CO line group no.
STORE END
(1
…
8/ )
SELECT
NEXT PREV
or
To continue
To continue
(1
…
8)