Panasonic KX-TEM824 - CPC Signal Detection-Incoming [420]; CPC Signal Detection-Outgoing [421]; Disconnect Time [422]

3.3 PT Programming
224 Feature Guide
CPC Signal Detection—Incoming [420]
Note
CPC signal detect time selection number:
00: Disable; 01–75: 22–614 ms (detect time: 8 ms increments)
Feature & Programming References
1.10.10 Calling Party Control (CPC) Signal Detection
CPC Signal Detection—Outgoing [421]
Note
When this programme is disabled, CPC Signal Detection is only activated during an incoming outside
(CO) line call or after an outgoing outside (CO) line call is placed on hold.
Feature & Programming References
1.10.10 Calling Party Control (CPC) Signal Detection
Disconnect Time [422]
4 2 0 X
NEXT
CO line no.
STORE END
(1
…
8/ )
SELECT
NEXT PREV
or
To continue
To continue
(00
…
75)
4 2 1
NEXT
CO line no.
STORE END
(1
…
8/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(Enable/
Disable)
4 2 2
NEXT
CO line no.
STORE END
(1
…
8/ )
SELECT
SELECT
NEXT PREV
or
Refer to the note.*
To continue
To continue