Panasonic KX-TEM824 - SMDR Parameter [801]; Incoming;Outgoing Call Selection for Printing [802]; Secret Number SMDR Print Suppression [803]; System Data Dump [804]

3.3 PT Programming
Feature Guide 249
SMDR Parameter [801]
Feature & Programming References
1.20.1 Station Message Detail Recording (SMDR)
Incoming/Outgoing Call Selection for Printing [802]
Note
Outgoing Call: On (Print all calls)/Off (No printing)/Toll (Print toll calls only)
Incoming Call: On (Print all calls)/Off (No printing)
Feature & Programming References
1.20.1 Station Message Detail Recording (SMDR)
TRS—COS 2-5 Denied Code [302-305]
Secret Number SMDR Print Suppression [803]
Feature & Programming References
1.20.1 Station Message Detail Recording (SMDR)
System Speed Dialling Number [001]
System Data Dump [804]
<To select All parameters, System parameter, Speed dial, and/or Stop output>
8 0 1
NEXT
page length
(4
…
99 lines)
(0
…
95 lines)
END
STORE
NEXT
skip perforation
STORE
<Select the page length>
<Select the skip perforation>
8 0 2
NEXT
(On/Off/Toll) (On/Off)
END SELECT STORE NEXT SELECT STORE
<Select an outgoing call> <Select an incoming call>
8 0 3
NEXT
(No Printing/
Printing)
END SELECT STORE
8 0 4
NEXT END SELECT
To continue
(All para/
System para/
Speed dial/
Stop output)
STORE