Panasonic KX-TEM824 - Caller ID Type [910]; Call Log Next Page [927]; SMDR Mode for Printing [929]; Call Forwarding Selection [963]

3.3 PT Programming
254 Feature Guide
Caller ID Type [910]
Feature & Programming References
1.16.1 Caller ID
Call Log Next Page [927]
Note
This programme enables the PBX to include page breaks when printing out call logs for each extension.
SMDR Mode for Printing [929]
Note
Even if "On" (outgoing/incoming call) or "Toll" (outgoing call) is selected in Incoming/Outgoing Call
Selection for Printing [802], when "MODE 2" is selected in this programme, the call log information is
not displayed by SMDR, but the information for each extension is displayed by Call Log Printout.
Feature & Programming References
1.20.1 Station Message Detail Recording (SMDR)
1.20.2 Call Log Printout for Each Extension
Call Forwarding Selection [963]
9 1 0
NEXT
CO line no.
STORE END
(1
…
8/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(FSK/DTMF)
9 2 7
NEXT SELECT STORE END
(Enable/Disable)
9 2 9
NEXT SELECT STORE END
(MODE 1/MODE 2)
9 6 3
NEXT
extension jack no.
STORE END
(01
…
24/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(Enable/
Disable)