1.5 Before Leaving Your Desk
78 User Manual
To leave a voice message using Direct Message
To view and play back a voice message in a voice message area
PT/SLT
On-hook.
Record a
message.
Off-hook.
Dial another
extension number.
Enter 725. Enter 1.
2 5 17
C.Tone
another
extension no.
Enter #.
An SLT user can enter "0"
instead of "#".
Press MESSAGE.
When the Message/Ringer Lamp or MESSAGE button is lit
(the Caller ID Indication—Personal/Common button will be lit, if assigned)
Display PT
Off-hook. Listen to the message.
Press MESSAGE
until the desired
message is displayed.
To go to the next message
To erase the message*
1
Enter 1–3 or 9 while confirming the message or
within 5 s of playback ending.
To go back to the previous message
To play back the message from
the beginning
Voice
Message
1
2
3
9
C.Tone
On-hook.
To Next Page
Loading...
