Panasonic KX-TG1100CX - Page 7

7
Preparation
Base unit
A Charge contacts
B {x} (Page)
Charger (KX-TG1102 only)
A Charge contacts
Displays
Symbols used in these
operating instructions
Icons Meaning
w Within range of base unit
0w4
Out of range, no registration
or no power on base unit
x
Paging, intercom mode or
accessing base unit
k Making or answering a call
C Phonebook mode
l Setting mode
5 Battery strength
Call bar is on (page 12).
Direct call is on (page 12).
Key lock is on (page 9).
Ringer volume is off (page
12).
LINE
B
A
A
Displayed when you press
{#}.
If “BS NO” is selected for
standby mode display (page
12) and the current base unit
number is 1, “-1-” is
displayed.
If “HS NO” is selected for
standby mode display (page
12) and the current handset
number is 2, “[2]” is
displayed.
4 new calls
When new calls have been received, the
display will show the number of new calls.
Symbol Meaning
{j/OK} Press {j/OK}.
i Proceed to the next
operation.
“ ” Select the words in quotations
shown on the display (e.g.,
“SETTING HS”) by pressing
{e} or {v}.
Icons Meaning
TG1100_1102CX(e-e).book Page 7 Tuesday, August 29, 2006 10:30 AM