12
Useful Telephone Settings
*1 Call bar feature prohibits making outside calls. When call bar is turned on, only emergency
calls can be made. To store emergency numbers, see page 13.
*2 If you forget your PIN, see page 18.
*3 Direct call feature allows you to dial a preset phone number simply by pressing {C}. No
dialling is necessary.
*4 If you change the PIN, please write down your new PIN as the unit will not reveal the PIN
to you.
*5 Auto talk feature allows you to answer calls simply by lifting the handset off the base unit
or charger. You do not need to press {C}.
Guide to base unit settings
To customise the base unit:
1 {j/OK}
2 Press {e} or {v} to select “SETTING BS”. i {>}
L “INPUT CODE” is displayed.
3 Enter the desired code number. Follow the instructions in the “Feature” column of the
chart.
L To exit the operation, press {ih}.
OTHER OPT HSPIN CHANGE Change handset PIN (“0000”).
*4
− Enter the current 4-digit handset PIN.
*2
− Enter the new 4-digit handset PIN.
− Enter the new 4-digit handset PIN again.
AUTO TALK Auto talk on/off (“OFF”)
*5
RESET HS ————— Reset handset to its default settings.
− Follow steps 1, 2, and 3.
− Enter handset PIN (default: “0000”).
*2
− {v} i {>}
Code No. Feature (Default setting)
{0} Reset base unit to its default settings.
*1
− Enter base unit PIN (default: “0000”).
*2
i {>}
{3} Dialling mode (Tone): page 8
Flash time (600 ms)
*3
− Enter base unit PIN (default: “0000”).
*2
i {2} i {1}
− Select the desired setting by pressing {1} for 100 ms, {2} for 600 ms
or {3} for 300 ms. i {>}
DTMF mode (Off): page 14
Handset
settings menu
Sub-menu Feature (default setting)
TG1100_1102FX(e-e).book Page 12 Wednesday, February 15, 2006 11:42 AM
To Next Page
Loading...
