Useful Information
40
Wall mounting
Note:
L Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
Base unit
1
Lead the AC adaptor cord and telephone
line cord through the hole in the wall
mounting adaptor in the direction of the
arrow.
2 Tuck the telephone line cord inside the
wall mounting adaptor (A). Connect the
AC adaptor cord and telephone line cord
(B).
Model shown is KX-TG4131 series:
page 3
3 Insert the hooks on the wall mounting
adaptor into holes 1 and 2 on the base
unit.
4 Adjust the adaptor to hold the base unit,
then push it in the direction of the arrow
until it clicks into place.
Hooks
A
B
AC adaptor cord
2
1
2
1
PNQX3129YA.book Page 40 Monday, January 23, 2012 4:41 PM
To Next Page
Loading...
