Programming
19
Programmable settings
You can customise the unit by programming the following features using the handset.
Programming by scrolling through the display menus
1
{j/OK}
2 Press {V} or {^} to select the desired main menu. i {j/OK}
3 Press {V} or {^} to select the desired item in sub-menu 1. i {j/OK}
L In some cases, you may need to select from sub-menu 2. i {j /OK}
4 Press {V} or {^} to select the desired setting. i {j/OK}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {ic}.
Note:
L In the following table, < > indicates the default settings.
Main menu Sub-menu 1 Sub-menu 2 Page
Caller List ––23
Answer System
(KX-TG2521)
Play New Msg. –26
Play All Msg. –26
Erase All Msg. –27
Greeting Start REC 26
Play Greeting 26
Default 26
Settings Remote Code 27
Number of Rings
<4 Rings>
29
Recording Time
<3 Minutes>
29
Call Screening
<On>
25
Answer On –25
Answer Off –25
Intercom
*2
––32
Ph.Book Setup New Entry –18
Copy All
*2
(KX-TG2521)
––
TG2511_21FX(e).book Page 19 Tuesday, February 2, 2010 3:08 PM
To Next Page
Loading...
