Answering System
28
Caller’s recording time
You can change the maximum message
recording time allowed for each caller.
You can also select “Greeting Only”
which sets the unit to announce a
greeting message to callers but not
record messages. The default setting is
“3 Minutes”.
1 {j/OK}
2 {V}/{^}: “Answer System” i
{j/OK}
3 {V}/{^}: “Settings” i {j/OK}
4 {V}/{^}: “Recording Time” i
{j/OK}
5 {V}/{^}: Select the desired setting.
i {j/OK} i {ic}
Note:
L When you select “Greeting Only”:
– If you do not record your own
message, the unit will play the pre-
recorded greeting-only message
asking callers to call again later.
– If you use your own message,
record the greeting-only message
asking callers to call again later
(page 24).
TG2511_2521CX(e-e).book Page 28 Thursday, March 11, 2010 10:34 AM
To Next Page
Loading...
