22
“
Programmable Functions
(Base\Unit)
1
Press (FUNCTION/EDIT).
2
Scroll to “LCD contrast” by pressing (›)
or (‹).
3
Press (fl) (Yes key).
≥The current setting is displayed.
4
Select the desired contrast by pressing (›)
or (‹).
≥Each time you press (›) or (‹), the LCD
contrast will change.
5
Press (fl) (Save key).
≥A beep sounds.
≥To exit the programming mode, press
(EXIT/STOP).
≥You can exit the programming mode any time by pressing (EXIT/STOP).
1
Date and time
Save DIRECT#
43
1
=Yes
1
LCD contrast
Set answering
43
1
=Yes
LCD contrast
Low ❚❚❚❚❚ High
43
1
=Save
LCD contrast
Low ❚❚❚❚❚ High
43
1
=Save
LCD contrast
Low ❚❚❚❚❚ High
To Next Page
Loading...
