55
For assistance, please call: 1-800-211-PANA(7262)
Cordless Telephone
During an intercom call:
≥If the cordless handset user has difficulty hearing the base unit user,
decrease the base unit speaker volume by pressing (›).
≥If an incoming call is received, the intercom call stops and the unit starts to
ring. To answer, press , (DIGITAL\SP-PHONE) or place the handset
and lift it again. The intercom is ended.
Transferring a Call Using the Intercom
(Cordless\Handset) (Base\Unit)
The intercom can be used during a call. This feature enables you to
transfer a call between the cordless handset and the base unit.
From the cordless
handset to the base unit
1
Cordless handset:
During a call, press
(CLEAR/INTERCOM/HOLD).
≥The call is put on hold and
“Line on HOLD.
To transfer press
INTERCOM.” is displayed.
2
Press
(CLEAR/INTERCOM/HOLD)
again. Talk to the paged
party after the beeps.
≥If the base unit user does not
answer, press to return to
a call.
3
Base unit:
When the other party’s voice
is heard, lift the handset or
talk into the MIC.
4
To complete the transfer:
—when using the handset,
press (OFF) on the
cordless handset.
—when using the
speakerphone, press
(DIGITAL\SP-PHONE).
From the base unit to the
cordless handset
1
Base unit:
During a call, press
(LOCATOR/INTERCOM).
≥The call is put on hold and
DIGITAL SP-PHONE indicator
flashes.
≥If the cordless handset user
does not answer:
—when using the handset,
press
(LOCATOR/INTERCOM),
then press (HOLD) to return
to a call.
≥—when using the
speakerphone, press
(DIGITAL\SP-PHONE) to
return to a call.
2
Cordless handset:
Press
(CLEAR/INTERCOM/HOLD) to
answer the page.
3
To complete the transfer:
—when using the handset,
place the handset on the
cradle.
—when using the
speakerphone, press
on the cordless handset.
Line on HOLD.
1
=Conference
Intercom
Line on HOLD.
1
=Conference
Intercom
To Next Page
Loading...
