Preparation
18
Setting the unit before
use
Display language
You can select either “English” or
“Français” as the display language. The
default setting is “English”.
1 {MENU} i {0}{8}
2 Select the desired setting.
3 Press the right soft key to save. i
{OFF}
Dialing mode
If you cannot make calls, change this
setting depending on your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary pulse dial service.
1 {MENU} i {0}{5}{1}
2 Select the desired setting. i {Save}
i {OFF}
TG262xC(e).book Page 18 Tuesday, January 24, 2006 6:03 PM
To Next Page
Loading...
