Panasonic KX-TG2721NZ - Getting Started Guide; Initial Setup Procedures

Setting up
Connections
R Use only the supplied Panasonic AC
adaptor PNLV226AL.
R When mounting the unit on a wall, see
page 38.
n Base unit
Hook
“Click”
Press plug firmly.
Use only the supplied
telephone line cord.
To single-line
telephone socket
DSL/ADSL filter*
*DSL/ADSL filter (not supplied) is required if
you have DSL/ADSL service.
Correct Incorrect
To power outlet
“Click”
n Charger
To power outlet
Hooks
Battery installation
R USE ONLY Ni-MH batteries AAA (R03)
size.
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities (
, ).
Rechargeable Ni-MH ONLY
Battery charging
Charge for about 7 hours.
R When the batteries are fully charged,
“Fully charged” is displayed.
Confirm “Charging” is displayed.
9
Getting Started
TG2721_2722NZ(en)_0807_ver002.pd9 9 2012/08/07 10:29:46