Shared Phonebook
18
L If there is no entry corresponding
to the character you selected, the
next entry is displayed.
3 {V}/{^}: Scroll through the
phonebook if necessary.
4 {C}
Editing entries
1
Find the desired entry (page 17).
i {MENU}
2 {V}/{^}: “Edit” i {OK}
3 Edit the name if necessary (16
characters max.; page 17). i
{OK}
4 Edit the phone number if necessary
(24 digits max.). i {OK}
5 {V}/{^}: “Save” i {OK} i
{OFF}
Erasing entries
1
Find the desired entry (page 17).
2 {CLEAR}
3 {V}/{^}: “Yes” i {OK} i {OFF}
Chain dial
This feature allows you to dial phone
numbers in the phonebook while you are
on a call. This feature can be used, for
example, to dial a calling card access
number or bank account PIN that you
have stored in the phonebook, without
having to dial manually.
1 During an outside call, press {k}.
2 {V}/{^}: Select the desired entry.
3 Press {OK} to dial the number.
Note:
L When storing a calling card access
number and your PIN in the
phonebook as one phonebook entry,
press {PAUSE} to add pauses after
the number and PIN as necessary
(page 14).
L If you have rotary/pulse service, you
need to press {*} (TONE) before
pressing {k} in step 1 to change the
dialing mode temporarily to tone.
When adding entries to the
phonebook, we recommend adding
{*} (TONE) to the beginning of
phone numbers you wish to chain dial
(page 17).
TG401xC(e).book Page 18 Thursday, January 14, 2010 1:29 PM
To Next Page
Loading...
