Preparation
16 For assistance, please visit http://www.panasonic.com/phonehelp
Installing the battery in the
cordless handset
1 Insert the battery, and press it down
until it fits in position within the
compartment.
Note:
L The end of the battery with the metal
terminals should be inserted first and
should be at the foot of the cordless
handset.
L The flat side of the battery should fit
against the inside of the battery
compartment as shown.
2 Close the cover.
Battery charge
Place the cordless handset on the charger
and charge for 7 hours before initial use.
Make sure that the cordless handset faces
forward as shown.
L The CHARGE indicator will light, and
“Charging” is displayed.
L When the battery is fully charged,
“Charge completed” is displayed.
L A discharged battery may charge quickly
and feel warm during the charging
process. This is normal.
Note:
L To ensure that the battery charges
correctly, clean the charge contacts of
the cordless handset and charger
monthly with a soft, dry cloth. Clean
more often if the unit is subject to
grease, dust or high humidity.
Charge
contacts
CHARGE indicator
To Next Page
Loading...
