Panasonic KX-TG4500B - Finding and calling a Phonebook item

Phonebook
44 For assistance, please visit http://www.panasonic.com/phonehelp
Note:
L If the display shows “Memory is full”
in step 2, erase unnecessary
Phonebook items (page 46).
Character table
The number keys are used to enter
characters. To enter a character, press the
appropriate dial key repeatedly, as
necessary. To enter another character that
is located on the same dial key, press {g}
to move the cursor to the next space, or
wait for the cursor to advance
automatically to the next character.
If you make a mistake while entering a
name:
Press {f} or {g} to move the cursor to
the incorrect character, press {CLEAR} to
delete, and enter the correct character.
Each time you press {CLEAR} a character
is erased to the left of the cursor. To erase
all characters, press and hold {CLEAR}.
For example, to enter “Tom Jones”:
1 Press {8} four times.
2 Press {6} three times and wait for the
cursor to move to the next character.
3 Press {6} once.
4 Press {0} once.
5 Press {5} four times.
6 Press {6} three times and wait for the
cursor to move to the next character.
7 Press {6} twice.
8 Press {3} twice.
9 Press {7} four times.
Finding and calling a
Phonebook item
Phonebook items can be searched for
alphabetically or by scrolling through the
Phonebook.
Note:
L You can leave the Phonebook at any
time by pressing {EXIT} on the base unit
or {OFF} on the cordless handset.
L If “No items stored” is displayed, the
Phonebook is empty.
Scrolling through the Phonebook from
the base unit
1 Press {f} or {g} to enter the
Phonebook.
L The number of items held are
displayed.
2 Press {<} or {>} repeatedly to display
the desired item.
3 Lift the handset or press {SP-PHONE}.
L The number is dialled automatically.
L You can press a line key instead of
pressing {SP-PHONE}.
Key Characters
{1} &’ ( ) , – . / 1
{2} abcABC2
{3} def DEF3
{4} ghi GHI 4
{5} jklJKL5
{6} mnoMNO6
{7} pqr sPQRS7
{8} tuvTUV8
{9} wxyzWXYZ9
{0} Space 0
{*} *
{#} #
{f} Moves the cursor to the left.
{g} Moves the cursor to the right.
(To enter another character
using the same key, move the
cursor to the next space.)
{CLEAR} Deletes the character or digit
to the left of the cursor.
Base Unit
Handset