To Next PageTo Next PageWhat to do if my Panasonic KX-TG4773B Cordless Telephone does not work?
If your Panasonic Cordless Telephone is not working, ensure the batteries are installed correctly. Fully charge the batteries. Check all connections. Unplug the base unit’s AC adaptor to reset the unit, then reconnect it. It is also possible that the handset has not been registered to the base unit, so register the handset.
Why can't I hear a dial tone on my Panasonic KX-TG4773B?
If you cannot hear a dial tone on your Panasonic Cordless Telephone, it may be due to the base unit’s AC adaptor or telephone line cord not being properly connected. Check these connections. You can also disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your service provider/ telephone company.
General| Brand | Panasonic |
|---|---|
| Model | KX-TG4773B |
| Type | Cordless Telephone |
| Frequency | 1.9 GHz |
| Number of Handsets | 3 |
| Answering System | Digital |
| Speakerphone | Yes |
| Caller ID | Yes |
| Call Waiting | Yes |
| Phonebook Capacity | 100 |
| Talk Time | 10 hours |
| DECT Technology | Yes |
| Range | Up to 1000 feet |
| Intercom | Yes |
| Backlit Display | Yes |
| Color | Black |
| Power Source | AC adapter |
Crucial safety guidelines to prevent injury and property loss.
Detailed safety precautions for product use, reducing fire and shock risks.
Connecting the base unit, charger, and telephone line for initial use.
Proper insertion of Ni-MH batteries and charging procedures.
Setting the date, time, display language, and voice guidance language.
Instructions for making calls using the base unit or handset directly.
How to answer incoming calls using the base unit or handset.
Methods to customize unit features via display menus or direct command codes.
Settings for Ringer volume, Initial settings, and Customer support.
Settings for Caller list, Answering device, Greeting, and Ring count.
Configuration for answering system, voice mail access, and intercom.
Adjusting date, time, alarms, and initial setup parameters.
Setting alarms for each handset and activating silent mode for quiet periods.
Instructions for registering up to 6 additional handsets to the base unit.
Procedures for adding new handsets and removing existing ones from the system.
Turning the system on/off, managing memory, and using call screening.
Playing back, pausing, erasing, and calling back messages.
Setting remote access codes and operating the answering system remotely.
Display messages and their corresponding solutions for troubleshooting.
Addressing issues like handset not turning on or unit not working.
Resolving issues with dial tone, handset indicators, and receiver volume.
Addressing display language, handset registration, and battery recharge problems.
Resolving issues with ringing, making calls, and Caller ID display/announcements.
Quick checks for common issues like connectivity and battery problems.
