Panasonic KX-TG5230 - LCD Contrast; Message Alert

Useful InformationAnswering SystemTelephone System
21
Programmable Settings
For assistance, please call: 1-800-211-PANA(7262)
Preparation
LCD Contrast
There are 6 levels of LCD contrast. The factory preset is “level 3”.
Message Alert
You can select whether or not the Ringer/Message Alert indicator on the handset
will flash slowly when new messages in your voice mailbox have been recorded
(p. 53). The factory preset is OFF
.
• The Ringer/Message Alert indicator will not flash for new messages while the
handset is in use.
• The Ringer/Message Alert indicator acts as a ringer indicator and as a message
alert indicator. This indicator will flash rapidly when a call is received whether this
feature is on or off.
• Battery operating time may be shortened when using this feature (p. 13).
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “LCD contrast” by pressing [d] or
[B], then press the soft key ( ).
4 Select the desired contrast by pressing [d]
or [B].
• The contrast will change.
• The number of steps indicates the contrast level.
5 Press the soft key ( ), then press [OFF].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Message alert” by pressing [d]
or [B], then press the soft key ( ).
4 Select “On” or “Off” by pressing [d] or [B].
5 Press the soft key ( ), then press [OFF].
Handset
SELECT
Initial setting
SELECT
LCD contrast
LCD contrast
Low High
Ex. Level 3
SAVE
Handset
SELECT
Initial setting
SELECT
Message alert
Message alert
:Off
SAVE
TG5230.fm Page 21 Wednesday, February 4, 2004 9:51 AM