22
Making Calls
Using the Handset
System capabilities (Operating more than one handset, p. 3)
Up to 3 extensions (3 handsets or 2 handsets and the base unit) can operate at
a time. The maximum operating number may decrease depending on the state
of use.
1 Press [C].
• “Talk” is displayed.
2 Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will
show the length of the call.
3 To hang up, press [OFF] or place
the handset on the base unit.
To have a hands-free phone
conversation
1 Press [s].
• “SP-phone” is displayed.
2 Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will
show the length of the call.
3 When the other party answers, talk
into the microphone.
4 To hang up, press [OFF] or place
the handset on the base unit.
Hands-free Digital Duplex Speakerphone
For best performance, please note the following:
• Talk alternately with the other party in a quiet room.
• If you or the other party has difficulty hearing, press [d] to decrease the
speaker volume.
• While talking using [C], you can switch to a hands-free phone conversation
by pressing [s]. To switch back to the receiver, press [C].
Handset
[REDIAL]
[ ]
[ ]
[OFF]
Soft Keys
[HOLD/INTERCOM]
Microphone
[B], [d]
TG5230.fm Page 22 Wednesday, February 4, 2004 9:51 AM
To Next Page
Loading...
