10
Displays
Handset
1 “ ” and “ ” indicate the status of each line as follows:
2 “SP” is shown when you are using the handset speakerphone.
3 “ ” indicates Voice Enhancer mode is on (p. 38).
4 “PRIVACY” indicates Call Privacy mode is on (p. 66). Other extension users
cannot join your conversation.
5 The battery icon indicates battery strength (p. 16).
6 The extension number of your handset is displayed if it has been registered to
the base unit (p. 3, 91, 92).
7 The display shows the dialed number, call status, programming options, phone
book items, caller information, etc.
8 The icons on the bottom line indicate the functions of the corresponding soft
keys which are located directly below the display (p. 9).
9 “D” (extension icon) and extension numbers are displayed (e.g. base unit=“0”,
handset 1= “1”)
a) during an intercom call (p. 56) or a conference call (p. 62);
b) while monitoring a room (p. 65).
Off (invisible) The line is free.
On The line is being used.
Flashing
A call is on hold on the handset or base unit, or the
Answering System is answering a call (p. 72).
Flashing rapidly A call is being received.
SP
PRIVACY
1
10 missed calls
D01
L1 L2
VE
1
]
LINE1 LINE2
SEARCH
1234 56
7
8
9
L1 L2
VE
TG6500C_Preparation.fm Page 10 Thursday, September 30, 2004 4:54 PM
To Next Page
Loading...
