12
Installation
Connecting the AC Adaptor
•
USE ONLY WITH
Panasonic AC ADAPTOR PQLV1.
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
• The AC adaptor should be connected to a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to become disconnected.
• If your unit is connected to a PBX which does not support Call Display services,
you cannot access those services.
• This unit will not function during a power failure. We recommend connecting a
standard telephone to the same telephone line or to the same telephone jack
using a T-adaptor.
AC Adaptor
Power Outlet (AC 120 V, 60 Hz)
Fasten the AC adaptor cord.
Hook
Raise the antennas.
Bottom of the base unit
TG6500C_Preparation.fm Page 12 Thursday, September 30, 2004 4:54 PM
To Next Page
Loading...
