Programmable Settings
20
Display Language
You can select either “English” or “Français” (French) as the display language. The
factory preset is “English”.
• If you select a language you cannot read, change the display language again
using direct commands (p. 90).
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Change language” by pressing
[d] or [B], then press the soft key ( ).
4 Press the soft key ( ) at “Display”.
5 To change from English to French, press the
soft key ( ).
To change from French to English, press the
soft key ( ).
• The display changes to the selected language.
• You can also select the display language by
pressing [d] or [B].
6
When French is selected, press the soft key ( ), then press
[OFF]
.
When English is selected, press the soft key ( ), then press
[OFF]
.
Handset
SELECT
Initial setting
SELECT
Change language
SELECT
Display
FRANÇ.
ENGLISH
Display
:English
SAUV.
SAVE
TG6500C_Preparation.fm Page 20 Thursday, September 30, 2004 4:54 PM
To Next Page
Loading...
