Useful InformationAnswering System
Preparation
35
Telephone System
Making Calls
Using the Handset
System capabilities
Up to 3 extensions (3 handsets or 2 handsets and the base unit) can be used at a
time, providing that the system has 2 or more handsets
(p. 3)
. The maximum
operating number may decrease depending on the state of use.
2 outside calls can be handled simultaneously on separate telephone lines by
the handset and the base unit, or by 2 handsets.
1 Press [C].
• A free line is automatically selected
and the line is displayed. (To change
the line selection, see page 70.)
• You can select a line by pressing a
line soft key ( ) or ( ),
instead of pressing [C].
• “Talk” is displayed.
2 Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will
show the length of the call.
3 To hang up, press [OFF] or place
the handset on the base unit.
• The line status icons ( and ) show the status of each line (p. 10).
• While using the handset, the IN USE indicator lights on the base unit.
To have a hands-free phone conversation
1 Press [s].
• A free line is automatically selected and the line is displayed.
(To change the line selection, see page 70.)
• “SP-phone” is displayed.
2 Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will show the length of the call.
3 When the other party answers, speak into the microphone.
4 To hang up, press [OFF] or place the handset on the base unit.
Handset
LINE1 LINE2
[C]
[s]
[HOLD/INTERCOM]
[REDIAL/
PAUSE]
[B], [d]
[OFF]
Soft Key
()
LINE1
Microphone
Soft Key
()
LINE2
L1 L2
TG6500C_CordlessTel1.fm Page 35 Thursday, September 30, 2004 4:56 PM
To Next Page
Loading...
