Answering System
Preparation
89
Telephone System Useful Information
Direct Commands
After pressing [MENU], you can also program menu items directly by pressing [0]
to [9], [*] and [#] instead of using the soft keys.
Menu item Command Selection items Page
Ringer volume
(Handset)
Line 1 [1] [1] [1] [1] : Low [2] : Medium
[3] : High [0] : Off
p. 26
Line 2 [1] [1] [2]
Ringer tone
(Handset)
Line 1 [1] [2] [1] [1]–[4] : Tone pattern 1–4
[5]–[8] : Melody pattern 1–4
p. 28
Line 2 [1] [2] [2]
Incoming call tone
(Handset)
[1] [3] [1] : On [2] : 2 times
[0] : Off
p. 69
Message play [2] –p.75
Date and time [4] Go to Step 3 on page 22. –
Voice enhancer [5] [1] : On [0] : Off p. 38
Copy phone book
–Copy 1 item
[#] [1] Go to Step 4 on page 53. –
Copy phone book
–Copy all items
[#] [2] Go to Step 4 on page 54. –
LCD contrast [0] [1] [1]–[6] : Level 1–6 p. 25
Key tone [0] [2] [1] : On [0] : Off p. 71
Auto talk [0] [3] [1] : On [0] : Off p. 25
Set dial mode [0] [5] [1] [1] : Pulse [2] : Tone p. 23
Set flash time Line 1 [0] [5] [2] [1] [1] : 700 ms [2] : 600 ms
[3] : 400 ms [4] : 300 ms
p. 68
Line 2 [0] [5] [2] [2] [5] : 250 ms [6] : 110 ms
[7] : 100 ms [8] : 90 ms
Set line mode Line 1 [0] [5] [3] [1] [1] : A [2] : B p. 24
Line 2 [0] [5] [3] [2]
Line selection
(Handset)
[0] [5] [5] [0]
: Auto
[1]
: Line 1
[2]
: Line 2
p. 70
Number of rings Line 1 [0] [6] [1] [1] [2]–[7] : 2–7 rings
[0] : Toll saver
p. 33
Line 2 [0] [6] [1] [2]
Recording time Line 1 [0] [6] [2] [1]
[1]
: 1 minute
[2]
: 2 minutes
[3] : 3 minutes
[0] : Greeting only
p. 32
Line 2 [0] [6] [2] [2]
Remote code [0] [6] [3] Go to Step 5 on page 82. –
Handset
TG6500C_Usefulinfo.fm Page 89 Thursday, September 30, 2004 4:58 PM
To Next Page
Loading...
