Useful InformationAnswering SystemTelephone System
9
Location of Controls
Preparation
Handset navigator key
Scrolls up [B] and down [d] the function menu, the
Caller List and the phone book.
Increases [B] or decreases [d] the handset ringer and
receiver/speaker volumes.
Base unit navigator key
Increases [B] or decreases [d] the base unit speaker
volumes.
Increases [B] or decreases [d] the base unit ringer
volume for the line after pressing [LINE SELECT]
(p. 27)
.
[H] and [G]
select the base unit ringer tone for the line
after pressing [LINE SELECT]
(p. 29)
.
Repeats [H] or skips [G] recorded messages.
Throughout these Operating Instructions, the soft keys are indicated by their
icons, such as , and .
Throughout these Operating Instructions, the handset navigator key is indicated
by the arrows [d] and [B].
Throughout these Operating Instructions, the base unit navigator key is
indicated by the arrows [d],
[B], [H] and [G].
How to use the soft keys/navigator keys
Handset soft keys
3 soft keys are used to select functions displayed
directly above each key. Functions displayed above
each key will change depending on the state of use.
On this sample display, “ ”, “ ” and
“ ” are displayed above the soft keys.
Pressing the right soft key selects “ ”.
Pressing the middle soft key selects “ ”.
Pressing the left soft key selects “ ”.
• When a function name does not appear above a soft key, the soft key has no
function.
SP
I
PRIVACY
1
IN USE
1
]
LINE1 LINE2
SEARCH
LINE1 LINE2
SEARCH
SEARCH
LINE2
LINE1
LINE1 LINE2
SEARCH
TG6500C_Preparation.fm Page 9 Thursday, September 30, 2004 4:54 PM
To Next Page
Loading...
