10 For assistance, please visit http://www.panasonic.com/help
Group ringer tone (Caller ID subscribers only)
You can assign a different ringer tone to the desired group.
If you select “Current ringer” (default), the unit uses the same
ringer tone as for other incoming calls when calls from this group are
received.
1 {C} i {MENU} i {V}/{^}: “Group” i {SELECT}
2 {V}/{^}: Select the desired group. i {SELECT}
3 {V}/{^}: Select the current setting of the group ringer tone. i
{SELECT}
4 {V}/{^}: Select the desired ringer tone. i {SAVE} i {OFF}
Editing entries
1 {C} i {V}/{^}: Select the desired entry. i {EDIT}
2 Edit the name if necessary (16 characters max.). i {OK}
3 Edit the phone number if necessary (24 digits max.). i {OK}
4 {V}/{^}: Select the desired group. i {SELECT} 2 times i {OFF}
Erasing all entries
1 {C} i {MENU} i {V}/{^}: “Erase all” i {SELECT}
2 {V}/{^}: “Yes” i {SELECT}
3 {V}/{^}: “Yes” i {SELECT} i {OFF}
Chain dial
1 During an outside call, press {MENU}.
2 {V}/{^}: “Phonebook” i {SELECT}
3 {V}/{^}: Select the desired entry. i {CALL}
TGA651(e).fm Page 10 Wednesday, April 7, 2010 10:24 AM
To Next Page
Loading...
