Panasonic KX-TG6511 Series - Programming; Programmable Settings

Programming
23
For assistance, please visit http://www.panasonic.com/help
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 23)
– using the direct commands (page 25)
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU}
2 Press {V} or {^} to select the desired main menu. i {SELECT}
3 Press {V} or {^} to select the desired item in sub-menu 1. i {SELECT}
L In some cases, you may need to select from sub-menu 2. i {SELECT}
4 Press {V} or {^} to select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L See page 25 for the default settings.
Main menu Sub-menu 1 Sub-menu 2 Page
Caller list
\
––34
Answering device
e
(KX-TG6521/
KX-TG6531/
KX-TG6541 series:
page 3)
Play new msg. –38
Play all msg. –38
Erase all msg.
*1
–39
Greeting Record greeting
*1
37
Check greeting 37
Pre-recorded
*1
37
Settings Ring count
*1
41
Recording time
*1
41
Remote code
*1
39
Screen call 36
Answer on
*1
–36
Answer off
*1
–36
V.M. access
g
––44
Intercom
4
––45
TG6511(e).book Page 23 Wednesday, April 28, 2010 4:35 PM