Panasonic KX-TG6561AL - Page 22

Programming
22
Programming using the direct commands
1
8 i {#}
2 Enter the desired code.
3 Select the desired setting. i M
L This step may vary depending on the feature being programmed.
L To exit the operation, press {ic}.
Note:
L In the following table, < > indicates the default settings.
Feature Code Setting System
*1
Page
Caller List {2}{1}{3} ––29
Set Date/Time {1}{0}{1} – r 13
Alarm {7}{2}{0}{1}: Once {2}: Daily
{0}: <Off>
–25
Time
Adjustment
*2
{2}{2}{6}{1}: <Caller ID>
{0}: Manual
r –
Intercom {2}{7}{4} ––37
Ringer Volume
*3
(Handset)
{1}{6}{0}{1}–{6}: Level 1–6 <6>
{0}: Off
––
Ringtone
*4, *5
(Handset)
{1}{6}{1} <Ringtone 1>––
Handset Name {1}{0}{4} ––25
Caller Barred {2}{1}{7} – r 25
Transmission
Power
{7}{2}{5}{1}: <Normal>
{2}: Low
r 13
LCD & Key
Backlight
{2}{7}{6}{1}: <On> {0}: Off ––
Contrast
(Display contrast)
{1}{4}{5}{1}–{6}: Level 1–6 <3> – –
Keytones
*6
{1}{6}{5}{1}: <On> {0}: Off ––
Area Code {2}{5}{5} – r 25
Auto Talk
*7
{2}{0}{0}{1}: On {0}: <Off>–15
TG6561AL(e).book Page 22 Monday, July 26, 2010 4:05 PM