Transferring calls,
conference calls
Outside calls can be transferred or a
conference call with an outside party can be
made:
– between 2 handsets
– between a handset and the base unit
*1
*1 KX-TG7741/KX-TG275SK series: page 3
Handset
1 During an outside call, press MINTN to put
the call on hold.
2 MbN: Select the desired unit. a MSELECTN
3 Wait for the paged party to answer.
R If the paged party does not answer,
press M
N to return to the outside call.
4 To complete the transfer:
Press MOFFN.
R The outside call is being routed to the
destination unit.
To establish a conference call:
MMENUN a MbN: “Conference” a
MSELECTN
R To leave the conference, press MOFFN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold:
MMENUN a MbN: “Hold” a
MSELECTN
To resume the conference: MMENUN
a MbN: “Conference” a MSELECTN
Base unit
*1
*1 KX-TG7741/KX-TG275SK series: page 3
1 During an outside call, press
MINTERCOMN.
R To page a specific handset, enter the
handset number.
R To page all handsets, press 0 or wait
for a few seconds.
2 Wait for the paged party to answer.
R If paged party does not answer, press
MINTERCOMN to return to the outside
call.
3 To complete the transfer:
Press MSP-PHONEN.
R The outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN.
R To leave the conference, press
MSP-PHONEN. The other 2 parties can
continue the conversation.
R To put the outside call on hold, press
MHOLDN. To resume the conference,
press MCONFN.
Answering a transferred call
Handset
Press M N to answer the page.
Base unit
*1
*1 KX-TG7741/KX-TG275SK series: page 3
Press MSP-PHONEN to answer the page.
59
Intercom/Locator
To Next Page
Loading...
