Panasonic KX-TG7842C - Useful Information

Wall mounting
The base unit can be mounted on a wall by
changing the wall mounting adaptor’s position.
Note:
R Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
R Model shown is KX-TG7841 series.
Base unit
1 To remove the wall mounting adaptor,
push down the release levers (A).
Remove the adaptor (B).
A
A
A
A
BB
BB
2 A Turn the adaptor so that the words
“UP WALL” are facing up.
B Tuck the telephone line cord inside the
wall mounting adaptor.
C Connect the AC adaptor cord and
telephone line cord.
3
1
2
Hook
3 Insert the lower tabs of the adaptor into
the unit’s bottom slots (A), then insert by
pushing down the levers of the adaptor
into the upper slots (B).
R The words “UP WALL” should be
facing up.
AA
AA
BB
BB
4 Mount the unit on a wall then slide down
to secure in place.
83 mm
(3
1
/
4
inches)
or
102 mm
(4 inches)
2
1
Wall phone plate
102 mm
83 mm
(4 inches)
1
2
(3
1
/
4
inches)
Charger
Drive the screws (not supplied) into the wall.
Screws
27.2 mm
(ޓinches)
1
/
16
70
Useful Information
TG78xxC(en)_1221_ver013.pdf 70 2012/12/21 11:21:32