*6 If you do not want the unit to ring before the caller information is received, set to “O
ff”.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
*7 This setting is available when you have the key finder (KX-TGA20EX). Read the installation
guide for more information on the key finder.
*8 For models with supplied key finders, the display shows “1: Finder1”.
*9 If you register 2 or more key finders.
*10 If you have 2 or more key finders.
*11 KX-TG7861 series (page 3) and KX-TGA786E (optional handsets): (page 4)
*12 KX-TG7921 series (page 3)
*13 You can set the handset display backlight while on charge.
– “On”: Backlight is on (dimmed).
– “Off”: Backlight turns off after 10 seconds of charging.
*14 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*15 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*16 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*17 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*18 This menu icon is displayed when the key finder is not registered.
Special programming
Alarm
A
n alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Set the date and time beforehand
(page 16).
1 M
N
(right soft key) #720
2 Select an alarm by pressing 1 to 3. a
MOKN
3 MbN:
Select the desired alarm option. a
MOKN
“O
ff”
Turns alarm off. Go to step 9.
“O
nce”
An alarm sounds once at the set time.
“D
aily”
An alarm sounds daily at the set time.
Go to step 5.
“W
eekly”
Alarm sounds weekly at the set time(s).
4 P
roceed with the operation according to
your selection in step 3.
n Once:
Enter the desired date and month. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press M
N.
a MOKN
5 Set the desired time. a MOKN
28
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
Programming
To Next Page
Loading...
